Trump Signs Common Cents Act to End Penny Minting

Close-up of a hand signing insurance documents in an office setting.
Photo by Kampus Production on Pexels

Key takeaways

  • President Donald Trump signed the bipartisan Common Cents Act, officially ending the production of the U.S. penny.
  • It currently costs the U.S. Mint nearly 4 cents to manufacture a single one-cent coin.
  • The legislation is projected to save the federal government between $56 million and $85 million annually.
  • Existing pennies remain legal tender and will continue to circulate through the Federal Reserve.

The penny minting end was officially codified on Friday as President Donald Trump signed the bipartisan Common Cents Act, a legislative move that terminates nearly 250 years of one-cent coin production in the United States. The signing marks the final step in a process that began in late 2025, when the federal government first ceased the manufacturing of the coin due to rising production costs.

Spilled jar of pennies creating a pattern of coins representing savings and
Photo by Pixabay on Pexels

What happened

On Friday, November 20, 2026, President Donald Trump signed the Common Cents Act into law. The legislation, which received bipartisan support, formally directs the federal government to stop the minting of the penny. The measure moved through the legislative process with significant efficiency, passing both the House of Representatives and the Senate via voice vote, a method that indicates a lack of notable opposition in either chamber.

The formal law arrives nine months after the government had already physically stopped making pennies in November 2025. That initial halt followed a call from President Trump to the Treasury Department to end production, citing the process as “so wasteful!”

Rep. Lisa McClain, R-Mich., the author of the bill, emphasized the fiscal necessity of the move. On September 29, 2026, following the Senate’s passage of the measure, McClain stated on X that the legislation would save $85 million per year by permanently ending penny production, calling the decision “common sense.”

Why it matters

The decision to end the production of the penny is driven primarily by a significant economic deficit in the coin’s manufacturing process. According to the U.S. Mint, it costs nearly 4 cents to produce a single penny. This means that for every cent added to the nation’s currency supply through new pennies, the government incurs a net loss of approximately 3 cents.

While Rep. McClain estimates the annual savings at $85 million, the U.S. Mint provided a more conservative figure, stating last year that the immediate annual savings from discontinuing penny production would be $56 million. Regardless of the exact figure, the cessation of minting represents a significant reduction in wasteful federal spending.

Beyond the direct savings to the Treasury, the end of penny minting signals a shift in the composition and hierarchy of U.S. coinage. As the penny is removed from the active production list, the nickel moves to the bottom of the U.S. Mint’s currency manufacturing list. This shift has already prompted changes in how other coins are produced, specifically regarding the nickel, which can now be manufactured using a more cost-effective composition of an inner layer of zinc and an outer layer of nickel, rather than the more expensive nickel and copper combination currently in use.

The evolution of the American cent

The penny has been a staple of American commerce for nearly two and a half centuries. Since the passage of the Coinage Act in 1792, the U.S. Mint has seen the penny undergo several radical transformations in design, size, and material composition.

Era/Year Design/Feature Composition/Details
1787 Benjamin Franklin’s Sundial The first penny produced
1793 Liberty and 15 Chain Links Official U.S. Mint production begins
1857 Flying Eagle and Wreath Smaller shape; 88% copper and 12% nickel
1859 Indian Head design Added to one side of the coin
1909 Abraham Lincoln The modern-day face of the penny
2010 Union Shield Features a shield on the tails side
Exterior of a building in Washington DC with District of Columbia flag
Photo by Quang Vuong on Pexels

The early years and the Franklin era

The history of the cent begins even before the official establishment of the U.S. Mint’s standard production. The very first penny, produced in 1787, featured a unique sundial design created by Benjamin Franklin. Once the U.S. Mint took over formal production in 1793, the coin’s appearance shifted. These early versions featured an image of a woman representing Liberty on one side and 15 chain links on the other.

Mid-century shifts and the Indian Head

A major redesign occurred in 1857, which saw the penny take on a smaller physical shape. This era introduced the flying eagle design on one side and a wreath on the other. This period also marked a significant change in metallurgy; the coin transitioned from being 100% copper to a mixture of 88% copper and 12% nickel. Two years later, in 1859, the “Indian Head” design was added to one side of the coin, a look that would persist for decades.

The Lincoln and modern eras

The most recognizable era of the penny began in 1909, when the coin was given its modern-day face featuring President Abraham Lincoln. The design has remained relatively consistent since then, with the most recent major update occurring in 2010. The U.S. Mint issued the “Union Shield” theme in 2010, which includes a shield on the tails side of the coin. According to the U.S. Mint, this shield was designed to represent “Lincoln’s preservation of the United States as a single country.”

What it means for you

For the average consumer and business owner, the end of penny minting does not mean the end of the penny itself. The new law explicitly states that the penny can still be used as legal tender “for all debts, public charges, taxes, and dues.”

For consumers and shoppers

If you are a shopper who relies on cash, you should not expect to see pennies disappear from your change overnight. The Treasury Department has stated that the Federal Reserve will continue to recirculate the approximately 114 billion pennies currently in existence “for as long as possible.” This means that while no new pennies are being added to the economy, the existing supply will continue to move through registers and wallets.

A customer making a contactless payment with a smartphone at a grocery
Photo by Kampus Production on Pexels

For businesses and retailers

One of the most significant practical changes involves how transactions are handled. The Common Cents Act provides a specific procedure for stores and businesses that accept cash payments. To accommodate the lack of new pennies, businesses are now permitted to round their prices to the nearest amount divisible by 5 cents. This will likely lead to more standardized pricing in cash-based transactions, moving away from the fractional cents that necessitated the use of the penny.

Counterpoints and open questions

While the economic argument for ending penny production is strong, the move is not without its nuances. One area of continued activity will be the collector market. The U.S. Mint has indicated that it will not stop all penny production entirely; instead, it will continue to produce collector versions in “limited quantities.” This ensures that numismatists and collectors can still acquire new penny releases, even if they are no longer part of general circulation.

There are also lingering questions regarding the speed of the transition. While the Federal Reserve intends to recirculate the 114 billion pennies in existence, the rate at which that supply diminishes is unknown. If the circulation of existing pennies slows down faster than anticipated, businesses may face challenges in providing exact change, making the implementation of the 5-cent rounding rule even more critical.

What happens next

As the United States moves away from the penny, several key signals will indicate the progress of this transition. First, watch for the widespread adoption of the rounding rule in retail environments. As more businesses implement the ability to round to the nearest 5 cents, the necessity for the penny will diminish further.

Secondly, the U.S. Mint’s shift in manufacturing processes will be a key indicator of the economic impact. The transition of the nickel to a zinc and nickel composition is a direct consequence of the penny’s removal, and the efficiency of this new production method will be a primary metric for the Treasury Department’s success in reducing costs.

Finally, the Federal Reserve’s management of the existing 114 billion pennies will be a long-term process. The gradual depletion of this massive stockpile will eventually lead to a currency landscape where the nickel serves as the smallest unit of circulating coinage.

The formal end of penny minting marks the conclusion of a nearly 250-year era of American coinage. By prioritizing fiscal responsibility and reducing the wasteful expenditure of producing coins that cost more than their face value, the Common Cents Act prepares the U.S. economy for a more streamlined approach to cash transactions.

Frequently asked questions

Can I still use pennies to pay for things?

Yes, the penny remains legal tender according to the new law. You can use existing pennies for all debts, taxes, and public charges. The government is simply stopping the production of new ones.

Will businesses still give me change in pennies?

Businesses may still provide pennies if they have them in their existing cash reserves. However, the new law allows businesses to round cash transactions to the nearest 5 cents, which will likely become the standard practice.

Why did the government stop making pennies?

The primary reason is the high cost of production. It currently costs the U.S. Mint nearly 4 cents to make a single penny, resulting in a significant financial loss for every new coin minted.

What happens to the pennies already in circulation?

The Treasury Department and the Federal Reserve plan to continue recirculating the roughly 114 billion pennies that are already in the hands of the public for as long as possible.

References

Featured image: Photo by Kampus Production on Pexels

Leave a Reply